Quick Overview
material brown filter plain filter polycarbonate membrane
sterility non-sterile
feature hydrophilic
manufacturer/tradename Isopore™ Millipore
parameter
140 °C max. temp.
6 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi)
~16 mL/min-cm2 water flow rate at 10 psi (typical results)
matrix
Isopore™
pore size
0.22 μm pore size
5-20 % porosity
bubble point ≥5.2 bar, air with water at 23 °C
shipped in ambient
filter diam. 25 mm
thickness 25 μm
gravimetric extractables <1%
color brown
refractive index n/D 1.6
sterility non-sterile
feature hydrophilic
manufacturer/tradename Isopore™ Millipore
parameter
140 °C max. temp.
6 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi)
~16 mL/min-cm2 water flow rate at 10 psi (typical results)
matrix
Isopore™
pore size
0.22 μm pore size
5-20 % porosity
bubble point ≥5.2 bar, air with water at 23 °C
shipped in ambient
filter diam. 25 mm
thickness 25 μm
gravimetric extractables <1%
color brown
refractive index n/D 1.6
Details
Millipore GTBP Isopore™ track etched membrane filters are designed for epifluorescent microscopy, particle monitoring and air monitoring
Filter Code: GTBP; Refractive Index: 1.6
Diameter: 25mm; Pore Size: 0.22µm; Bubble Point @ 23°C: 3.5 bar; Water Flow Rate: 6mL/Minute x cm2/psi
Thickness: 7-22µm; Porosity: 5-20%; Surface: Plain Brown & Hydrophilic; Gravimetric Extractables: <1%
Sterilization: Autoclave at 121°C at 1 bar, Ethylene or Gamma irradiation
Pack of 100
Millipore's Isopore™ membrane filter is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore™ membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore™ membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. NOTE: Brown color may fade after autoclaving for sterility. Brown membranes are compatible with immersion oils, including Type B and Type F.
Filter Code: GTBP; Refractive Index: 1.6
Diameter: 25mm; Pore Size: 0.22µm; Bubble Point @ 23°C: 3.5 bar; Water Flow Rate: 6mL/Minute x cm2/psi
Thickness: 7-22µm; Porosity: 5-20%; Surface: Plain Brown & Hydrophilic; Gravimetric Extractables: <1%
Sterilization: Autoclave at 121°C at 1 bar, Ethylene or Gamma irradiation
Pack of 100
Millipore's Isopore™ membrane filter is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore™ membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Isopore™ membranes do not stain resulting in low background interference. Clearing is not necessary for most transmitted light microscopy. Matched-weight filters are not usually required because of low, constant tar and ash weights. Isopore membranes are non-hygroscopic, which permits rapid drying and reduced sample analysis time. NOTE: Brown color may fade after autoclaving for sterility. Brown membranes are compatible with immersion oils, including Type B and Type F.
Additional Information
| Brand | MTC BIO |
|---|---|
| UNSPSC | No |
