Benchmark Scientific B2000-2 2 L MyBath Water Bath Digital Display, 6.5 x 8 x 6 " Chamber Dimensions

The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a MyBath to fit every lab. The 2L model inludes easy to use controls which allow the user to digitally select and monitor settings. The temperature of the bath is adjustable in 1.0C increments and the temperature is shown on a large 2 digit display. The 2L MyBath includes a flat lid that can be set on top of the unit. It does not include a hinge.

High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. While the 2L MyBath does not include an automatic calibration button like the 4L, 8L, and 12L, it is possible to recalibrate manually. See instructions below. All models include seamless stainless steel chambers for easy cleaning and long life. These chambers resist rust and have NO corner, easier for clearning.

Recalibration with the 2L MyBath. If adjustment to the temperature calibration is required, this can be accomplished by following the steps below:

- Set the bath to desired calibration temperature and allow the bath to stabilize for 45 minutes
- Use a calibrated thermocouple to measure the actual temperature of the bath and compare to the display temperature. Make note of any difference.
- Press the “up” and “down” arrow keys at the same time. The display will briefly flash and display a factory set offset number.
- Use the arrow keys to adjust the offset number to account for the difference of the measured temperature and the display. The factory set offset number may not be zero. The offset number should be adjusted up or down to account for the difference between the measured temperature and the displayed temperature. (Ex. When there is +2°C difference between measured temperature and display temperature, and the offset number is factory set to +1°C, the user should adjust the offset to read +3°C)
- The display will flash four times and save the new offset number.